Szín: 1 szett - Új Pixhawk/PPZ/MK/MWC/PPM kódoló V1.0 verzió PPM kódoló/dekódoló RC vevő repülésvezérlő

100% Brand new and high quality!
The PPM Encoder plugs into the PWM servo
output ports of any R/C receiver and encodes them into a PPM pulse suitable for
many autopilots (e.g. Pixhawk). Modifications to the R/C receiver are not
necessary.
The whole project is based around the ATMEL ATMEGA328p AVR
processor and all timing is done within interrupts so accuracy and stability is
optimized.
The design of the PPM Encoder is based on the Paperazzi PPM
Encoder.
Important Note: The firmware comes pre-configured to read 8
Channels. In case you would like to change the settings of the PPM encoder to
invert the PPM signal and change the fail safe pre-defined values you will need
an AVR ISP programmer in order to reprogram it.
The jumper on the board
no soldering default. In this case the board powered by
FC
Specifications:
Dimension: 28 x 19 x 5mm
Net Weight:
8g
Packing
content:
1 x PPM Encoder
1 x 10Pin input cable 60mm
1 x 4Pin output cable
100mm\