L9110S léptetőmotor-meghajtó - DC MOSFET IRF3205 10 / 15A 3-36V 30A L9110S kettős motorvezérlő modul H-híd

A cím elején szereplő szín/minta/méret/típus kerül kiszállításra!
DC MOSFET IRF3205 10/15A 3-36V 30A L9110S Dual Motor Driver Module H-bridge

Dual Motor Driver
Description: The drive performance of these non-L298 motor driver chip can be compared,
the driver focus on current and efficiency, effectively motor power and battery life.
Can withstand high current overload, the maximum current up to 30A.This drive also has a brake function can be quickly stopped the motor, brake quickly, braking obvious, easy to implement this featureThe drive uses the full two half-bridge driver chip low resistance N-channel MOSFET components.Complete two half-bridge driver chip reliable drive mode, the MOSFET switching losses to a minimum. Improve power utilization.
MOSFET driver chip comes with hardware brake function and power feedback.This drive is superior integrated low power chip solution and the other half-bridge power margin in the coordinated combination of programs and complex issues and complementary drive problemsN-channel MOSFET IRF3205 MOSFET, use two dedicated half-bridge driver chip on the top tube using the bootstrap capacitor, so that the tube has enough drive voltage of the MOSFET channel can be opened quickly, improve motor acceleration curvature, but also quickly for the motor brake. This allows the trolley can quickly start can quickly kill the car.The driver can operate at 0% -99% of the duty cycle of the PWM modulation, the motor driving voltage can be obtained sufficiently.Feature
Motor forward: DIR = 1 PWM = PWMMotor reversal: DIR = 0 PWM = PWMParking brake: DIR = X PWM = 0 (X is an arbitrary state)Motor and power connectionsPOWER connected to the positive power supply, GND power supply is negative. Two motors were connected MOTOR1, MOTOR2
Parameter Rated voltage: 3v-36v (can be customized according to the user)Rated Current: 10A/15APeak current: 30AUse: Freescale smart car contest Undergraduate Electronic Design Contest variety of DC motor control circuitDimensions: length 108mm, width 58mm Notice : Industry level of motherboard, does not provide circuit diagram, please forgive me.Package Included: 1 x Dual Motor Driver 10A/15AL9110S Stepper Motor Driveronboard two the L9110S motor control chip
the module can simultaneously drive two DC motors or a 4-wire 2-phase stepper motor
the module input voltage :2.5-12V
the 800mA continuous current output capability per channel1. Low static work current
2. Power supply voltage: DC2.5-12V
3. Each channel has 800mA continuous current output
4. Low saturation pressure drop
5. TTL/CMOS output level compatible, can be connected directly to the CPU
6. Output built-in clamping diode, apply to the perceptual load
7. Control and drive integrate in IC
8. Have pin high pressure protection function
9. Working temperature: 0-80 ℃
10.Size:29.2(mm)x23(mm)



Package Included1 X L9110S
202049897916/3 - ali110 (280)