Feature:>Stunning belly navel bar...
Brand new and high quality.T6.Core: ARM 32 Cortex-M3 CPU.Debug mode: SWD.72MHz work frequency.64K flash memory, 20K SRAM.2.0-3.6V power, I/O.Reset(POR/PDR).4-16MHz crystal.Micro USB connector , you can give the board power supply and USB communication.Size:5.3cm x 2.2cm.Package Included:1 x STM32F103C8T6 ARM STM32 Minimum System Development Board Module...
1.The new MKS Base 1.2 3D Printer Controller board combines and improves the assets of the RAMPS 1.4 and Arduino Mega 2560 boards on a fantastic single board solution. The MKS Base 1.2 is an optimal 3D printer controller solution for your Reprap 3D Printer.er board combines and improves the assets of the RAMPS 1.4 and Arduino Mega 2560 boards on a...
If you’ve ever tried to connect a 3.3V device to a 5V system, you know what a challenge it can be. bi-directional logic level converter is a small device that safely steps down 5V signals to 3.3V AND steps up 3.3V to 5V at the same time. This level converter also works with 2.8V and 1.8V devices. What really separates this Logic level converter from our...
Model: 16 Round 5050 full-color LED module Dimensions: out side Diameter 4.5cmInside Diameter 3.1 cmChip: WS2812 (built-in LED) LED: 5050 RGB full color highlight package Voltage: 5V Port: Digital Platform: Arduino microcontroller5050 highlight LED, built-in control chip, only an IO port to control multiple LED Chip built shaping circuit, signal...
Overview: TF card. It is compatible with 5V and 3.3V Arduino mainboards, Arduino-compatible boards and Arduino mainboards that SPI is on ICSP instead on pin D11~13 such as Leonardo.Features:Arduino compatibleSupports both SD card and TF cardCompatible with 5V and 3.3V Arduino mainboardsStackableSpecification:PCB size:56.15mm X56.23mm X 1.6mmOperating...
Featuresy reverse polarity will not damage the IC. IC control circuit and a power LED spot light utility. Control circuit chip with RGB components in a package in 5050, to form a complete external control pixels. built-in signal shaping circuit, any one pixel after receiving the signal through the waveform shaping and then output to ensure line waveform...
100% brand new and high qualityp-up MINI SD card interfaceThe related pins are already done elicit and annotationsBoard size: 18.5 (mm) x17.5 (mm)Package Included:5 x TF Micro SD Card ModuleMini SD Card Module Memory Module for Arduino ARM AVR 5PCS TF Micro SD Card Module Mini SD Card Module Memory Module Arduino ARM AVR
100% Brand new and high qualitys a 5V 1-Channel Relay interface board.It can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM and so on.1-Channel Relay interface board,Equiped with high-current relay : DC 30V AC250V 30AStandard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC,...
Bee Adapter is a compact USB to serial adapter equipped with BEE (20pin 2.0mm) sockets. With integrated FT232RL IC, It can be used for programming or communicating with board which basic Arduino but without USB interface, like Sniffer Nano. On the other hand, you may connect your PC to various wireless applications via the BEE compatible modules. pter...
Specification:Router,HDD,ADSL,broad band modem firmware upgrade or cracked upgrade cellphone,XBOX360,GPS serial communication,vehicle inspection and test,DVD flash and so on Burn write STC MCU,NXP MCU,renesas MCU,NEC MCU and so on Simple UART communication,commonly used UART debugging tools in supper terminal USB signal transferred to TTL signal,may be...
DS1302(without battery) is introduced trickle charge the clock chip, containing a real-time clock / calendar and 31 bytes of static RAM, via a simple serial interfacekle charge the clock chip, containing a real-time clock / calendar and 31 bytes of static RAM, via a simple serial interfacekle charge the clock chip, containing a real-time clock / calendar...
This adapter allows you to quickly and easily mount ily mount ily mount a USB Type A Female connector onto a breadboard or prototype board. It brings all 4 pins (included Shield Ground) of its USB Type A Female socket out to prototyping work.This simple board breaks out a female USB type A connector's VCC, GND, D- and D (4 pins) to a 0.1inch pitch...
Package Included:n for NRF24L01 PA CC2500 Arduino Module 2PCS 2.4G Wireless SMA Antenna 2dB Gain for NRF24L01 PA CC2500 Arduino Module
Specification:amming capability with optical isolation2 , onboard 12V, 10A/250VAC, 10A/30VDC relay , relay life long continuous pull 100,000 times3 , the module can be directly and microcontroller I / O link , with an output signal indicating4, the module has a freewheeling diode protection , short response time5, PCB dimensions : 47.0 (mm) x17.7...
Specification:g and so that the dot matrix c--an be flexible spliced .2.Common cathode with bright dot matrix(8*--8), display fresh and brilliant picture.3.A screen roll freely, to achieve the perfect pi--ture display4.Since the master chip is used in Max7219 to- make product have the following characteris--tics : 1).The transmission efficiency of up to...
RPI TFT LCD Adapter Can directly drive 2.4’TFT LCD Module’TFT LCD Module’TFT LCD ModuleRPI TFT LCD Adapter is a kind of Raspberry Pi Adapter, expanded from Raspberry Pi GPIO, directly connected to TFT LCD Module,and can successfully accomplish drive.Note:When RPI GPIO Shield connected with Raspberry Pi GPIO, please make sure their pins are...
This is a terminal adapter for the Arduino Nano. It lables for Arduino Nano version 3.0, however you can still use this adapter for the older version (just have to remember that A0-A7 are in the reverse order). You can use this adapter to easily hook up Arduino Nano to an outside world via hook up wires. Nano. It lables for Arduino Nano version 3.0,...
DIY KitsdeModule Operating voltage: 5VModule dimensions: length 3.2 cm X 3.2 cm wide X 1.3 cm highHoles with four screws, diameter 3mmModules with input and output interfaces, support for cascading multiple modulesWiring instructions:On the left block to an input port, an output port on the rightWhen the control of a single module, simply enter the port...
Length : 70 CMinter, Reprap,Module Package Included:10xTop 70cm 3Pin Cable set Female-Female Jumper Wire for Arduino 3D Printer Reprap 10Pcs70cm 3Pin Cable set Female-Female Jumper Wire for Arduino 3D Printer Reprap
100% brand new and high quality input/output ports RX, TX D13, D2 ~~ of,or 8 analog input port A0 to A7The TTL level serial transceiver port RX/TX6 PWM ports, D3, D5 , D6, D9, D10, D11Using Atmel Atmega168P microcontrollersupports serial downloadSupport for external 5v~ 12V DC power supplySupport 9V battery-poweredclock frequency 16MHzDimensions:33.3 x...
1.Feature:nterfaceIncrease the key state detection. Wide range of applications.2.Application :Robot ,Electronic products,and so on3.Brief introductionPS2 keyboard driver module, use a small microcontroller reads the PC PS2 keyboard key-press information, The values of the key will output by serial or parallel, for the use of other equipment. In a single...
We have black and red color , we send color by randomor by randomor by randomOur IO expansion board is evolving, this latest V5 IO expansion shield is now supporting Xbee. It combines our popular Xbee shield with IO expansion shield(V4). It even supports SD card which provides the ultimate functional expansion for Arduino so far. As its predecessor, it...
Input control voltage :3.3V-12Vrged voltage: 5-36VBoard use of opto isolated, completely separated from the 2-terminal voltage.Input is controlled by a 2 pin control ,a ground control can be directly connected to the control switch.Control current 1-5MA control voltage is different, the current difference is mainly the loss on the LED.Charged with maximum...
This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067.y 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067.y 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067.This chip is like a rotary switch - it internally routes the common pin (COM in the schematic, SIG on the board)to one...
Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability, Particularly suitable for industrial control applications. modulation efficiency, Anti-interference ability, Particularly suitable for industrial control applications. modulation efficiency, Anti-interference ability, Particularly suitable for industrial control...
1. Arduino-compatible Board. New.ega328 running at 16MHz with external resonator (0.5% tolerance)3. USB connection off board4. Supports auto-reset5. Max 150mA output6. Over current protected7. Reverse polarity protected8. DC input 5V up to 12V9. On board Power and Status LEDs10. Size:ďĽLong)33mm *ďĽwide1)18 mm *ďĽhigh)6mmPackage Included:2 x New...
1. 16-key board TTP229 capacitive touch sensor IC nsor IC nsor IC 2. onboard power indicator 3. working voltage: 2.4V-5.5V 4. the module can be set to output mode, the key output mode, the longest time and fast output / low power options 5. PCB board size: 49.3 (mm) x64.5 (mm)Package Included:2 x Arduino TTP229 16 Channel Digital Capacitive Switch Touch...
Features:onic components PCBSize: About 31 * 19 * 29mm / 1.22" * 0.75" * 1.14"Main color: BlackWorking voltage: 5VPulse circle: 20By rotating the rotary encoder can be counted in the positive direction and the reverse direction during rotation of the output pulse frequency, unlike rotary potentiometer count, this rotation counts are not limited. With...
Specification:ries With LED indicator light, use 150mA and 3.3V regulation chip. With VCCă€GNDă€TXDă€RXD foot for the Bluetooth. With "Re-seach" button(ON/OFF/WAKE foot for it , external MCU outinput "High level" can control module to re-seach). Compatible with bluetooth master module"ă€slave module"or master-slave(whole) module. Input voltage: 3.3~6V....
100% brand new and high qualitySize:7cm x 5.5cm x 2cmMini breadboard size: 4.4 x3.4 x1cmQuantity:1pcThe breadboard sticks on the prototype shield with its self-adhesive backingSmall soldering areaThe mini breadboard has 170 tie pointsSOIC place for IC1 reset button, 1 general use button, and 2 LED circuits can be used directly Package...
The Screw terminal can be screwed directly to the terminal on the thread and is reliable and convenient. It can be plugged into the Arduino controller. You can use this shield to save yourself from the bad port connection. Feel secure with this arduino-compatible screw shield. to the terminal on the thread and is reliable and convenient. It can be plugged...
Specification:basic 16 character by 2 line black-on-green display. Utilizes the extremely common HD44780 parallel interface chipset. Interface code is freely available. Yellow Backlight with black words. uses 4 Bit Arduino LCD Library. Size:8cm x 5.9cm - 3.15inch x 2.32inch.Shipping Included:1PCS*1602 LCD shield with Yellow backlight Yellow Backlight 1602...
The Screw terminal can be screwed directly to the terminal on the thread and is reliable and convenient. to the terminal on the thread and is reliable and convenient. to the terminal on the thread and is reliable and convenient. It can be plugged into the Arduino controller. You can use this shield to save yourself from the bad port connection. Feel...
1.Brand new and high quality.ower supply module, compatible with 5 V, 3.3 VApply to MB102 breadboard3.Input voltage: 6.5-12 V (DC) or USB power supply4.Output voltage: 3.3V/5V can switch over5.Maximum output current: <700 ma6.Fluctuation two road independent control, can switch over to 0 V, 3.3 V, 5 V7.On-board two groups of 3.3V, 5V DC output plug...
Specification:odulation efficiency, Anti-interference ability, Particularly suitable for industrial control applications.125 Channels, Multi-point communication and frequency hopping to meet the communication needsBuilt-in hardware CRC error detection, Multipoint communication address control.Low-power 1.9 ~ 3.6V, only 1uA on Power down modeBuilt-in...
Specification:uct Model: MX-05V2.Operating voltage: DC5V3.Quiescent Current: 4MA4.Receiving frequency: 315MHZ5.Receiver sensitivity:-105DB6.Size: 30 * 14 * 7mm7.External antenna: 32CM single core wire, wound into a spiralTechnical parameters of the transmitter head1.Product Model: MX-FS-03V2.Launch distance :20-200 meters (different voltage, different...
CH340G Replace FT232RL714 Digital input / output ports:TX,RX,D2 ~ D136 PWM ports:D3, D5, D6, D9, D10, D111 pairs of TTL level serial transceiver ports RX / TXUsing Atmel Atmega328P-AU MCUThere is bootloader installed in itSupport USB download and PowerSupport for external 5V ~ 12V DC power supplySupport power supply by 9V batterySupport ISP downloadDriver...
Specification:th Arduino Shield interfaces, form the SD card reader expansion board. Directly plugged into the Arduino UNO board, Arduino MEGA2560 or compatible motherboard for your arduino project to add a huge data storage space. Through the file system (Arduino IDE comes with an SD card library) you can easily complete the SD card file for read and...
Features:totransistor to detect the pulse of the finger, a red LED flashes with each pulse.Pulse monitor works as follows: The LED is the light side of the finger, and phototransistor on the other side of the finger, phototransistor used to obtain the flux emitted, when the blood pressure pulse by the finger when the resistance of the phototransistor will...
Brand new and high quality.duino IDE 1.0 (OSX/Win/Linux).Power via USB or External Source - 5v or 7-35v (automatic selection).On-board 500ma 5V Regulator.Built-in USB (and serial debugging).6 I/O Pins (2 are used for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB).8k Flash Memory...
1. Pitch 2.54mmr of Pins: 40Pin4. Type of Row: Single-Row5. Type of connector: StraightPackage Included:50 x 40Pin 2.54mm Single Row Straight Male Pin Header Strip PBC Ardunio 50PCS 40Pin 2.54mm Single Row Straight Male Pin Header Strip PBC Ardunio
Brand Name : ModuleNO R3 : 3x3 keypad shieldIC is a way to establish a simple capacitive touch interfaces. Now, by touching the shield, to establish a connection with your Arduin project is even more simple. The shield has nine capacitive touch touch pad. These touch pads are left with three electrode connection point of the joint. With this board, you...
Controller Philp PCD8544 LCD controller . input voltage :2.7-3.3v can be driverd by Arduino/STM32/8051/AVR/PIC and other low power controllers Compatible with Nokia 3310 LCD driving source code NOTE:This item is only Nokia 5100 LCD bare screen without PCB pinboard Package Included:2PCS 84*48 Nokia 5110 LCD Screen Nokia 5110 lcd Bare Screen For Arduino...
Brand new and high quality. an make your SD application more easier and simple. It is easily interfaced as a peripheral to your arduino sensor shield module. Through programming, you can read and write to the SD card using your arduino. Can be used for SD Card more eaisly, such as for MP3 Player, MCU/ARM system control. All SD SPI pins output, MOSI, SCK,...
Featuress acceleration) Use chip: MPU-6050 The power supply: 3-5 v (internal low voltage difference voltage stabilizing) Communication: standard IIC communication agreement Chip built-in 16 bit AD converter, 16 bits of data output The gyroscope range: 250 500 1000 2000 ° /s Acceleration range: ± 2 ± 4 ± 8 ± 16 g Specifications:Size:about 21*15*1.2...