Features: Brand new and high...
New Professional Caulk Away Remover and Finisher Made by Builders Choice To N3C3 Use: Caulk removal tool removes caulk fast,caulking tool smoothes for a perfect caulking beadIntroduction: Caulk removal tool: pick up the remover to make full contact with the old fillerto make the point of the old filling materialdrive removal,if the old filler is still...
New Professional Caulk Away Remover and Finisher Made by Builders Choice To Y2G2 Use: Caulk removal tool removes caulk fast,caulking tool smoothes for a perfect caulking beadIntroduction: Caulk removal tool: pick up the remover to make full contact with the old fillerto make the point of the old filling materialdrive removal,if the old filler is still...
This battery box holder with wire connector, fit for 4 x 1.5 V D size cell batteries.With spring clip design, you can easily to put the battery in it.Battery is not included here.Brand Unbranded MPN Does not apply UPC 4894462368435 EAN 4894462368435 EAN 4894462368435 ISBN 4894462368435 Designer/Brand Unbranded Spring Clip Black 4 x 1.5V D Size Battery...
New Professional Caulk Away Remover and Finisher Made by Builders Choice To Y5P2 Use: Caulk removal tool removes caulk fast,caulking tool smoothes for a perfect caulking beadIntroduction: Caulk removal tool: pick up the remover to make full contact with the old fillerto make the point of the old filling materialdrive removal,if the old filler is still...
1X(New Professional Caulk Away Remover and Finisher Made by Builders Choice G1B4 1X(Use: Caulk removal tool removes caulk fast,caulking tool smoothes for a perfect caulking beadIntroduction: Caulk removal tool: pick up the remover to make full contact with the old fillerto make the point of the old filling materialdrive removal,if the old filler is still...
Product Name: Furcate Pre Insulating TerminalDesign: Fork Shape; Material: Plastic, Metal; Quantity: 100( /-2% )PcsWire Size: AWG 22-16; Fit Bolt Diameter: 4mm/0.16"; Internal Diameter: 4mm/0.16"Tip Width: 6mm/0.24"; Total Length: 20mm/0.8"; Main Color: RedWeight: 46g; Package Content: 100 x Furcate Pre Insulating TerminalThe furcate pre-insulated...
Praktikus kapcsoló széleskörű felhasználásra. A háztartási elektromos készülékek hőmérsékletének szabályozására vagy védelmére.
8mm 10mm Offset Design Metal 12 Point Box Wrench Spanner L1R8 Product Name: Box WrenchType: Offset & Double 12 Point Box End; Opening Diameter: 8mm & 10mmMaterial: Metal; Size: 14.3 x 1.6 x 0.6cm/5.6" x 0.6" x 0.24" (L*W*T)Color: Silver Tone; Weight: 49gConvenient to be used for tightening and loosening bolts, nuts and other.Double-ended box type wrench...
6 pieces Open Frame Dry Cell Battery holder, 2 Needles, for 1 x 3 V CR123A H6M7 Main color: BlackMaterial: plastic, metalNet weight: 22gPin width: 1 mm / 0.1 cmPin distance: 38 mm / 3.8 cmBattery type: 3 V CR123 A battery (not included)Body size: 43 x 18 x 14 mm / 4.3 x 1.8 x 1.4 cm (L * W * H)Scope of delivery: 6 x battery holderOnly the above package...
2X( 10 Pieces Plastic Shell CR2032 Button Cell Battery Sockets Holder Case K5E8 2X(Product Name : Cell Button Battery Socket Holder;Fit for : 1 x CR2032 Battery (Not Included Here)Material : Plastic, Metal;Body Size : 23 x 18mm/ 0.9" x 0.7"(L*W)Color : BlackNet Weight : 12gPackage Content : 10 Pcs x Cell Button Battery Socket HolderBattery is not...
2X( 10 Pieces Plastic Shell CR2032 Button Cell Battery Sockets Holder Case P5V8 2X(Product Name : Cell Button Battery Socket Holder;Fit for : 1 x CR2032 Battery (Not Included Here)Material : Plastic, Metal;Body Size : 23 x 18mm/ 0.9" x 0.7"(L*W)Color : BlackNet Weight : 12gPackage Content : 10 Pcs x Cell Button Battery Socket HolderBattery is not...
Rectangle In Parallel 2-Wired 4 x 3.7V 18650 Battery Holder Case Black L8Y9 Material: Plastic, MetalFit for: 4 x 3.7V 18650 Battery (Not Included The Battery)Battery Connect Type: In ParallelTotal Size: 79 x 78 x 21mm/3.1" x 3" x 0.87"(L*W*H)Wire Length: 11cm/4.3"; Hole Dia: 3mm/0.12"Package Content: 1 x Battery Holder CaseMain Color: BlackNet Weight:...
10pcs 13Size Miniature Metal Shielded Sealed Groove Model Ball Bearing Size J1D6 model: MR104-ZZColour: silverMaterial: metal Size: 4 x 10 x 4mm(Inner Diameter x Outer Diameter x Thickness)Bearings reduce friction by providing smooth metal balls or rollers and a smooth inner and outer metal surface for the balls to roll against.These balls or rollers...
10pcs 13Size Miniature Metal Shielded Sealed Groove Model Ball Bearing Size G4L9 model: MR104-ZZColour: silverMaterial: metal Size: 4 x 10 x 4mm(Inner Diameter x Outer Diameter x Thickness)Bearings reduce friction by providing smooth metal balls or rollers and a smooth inner and outer metal surface for the balls to roll against.These balls or rollers...
10pcs 13Size Miniature Metal Shielded Sealed Groove Model Ball Bearing Size V2W4 model: MR104-ZZColour: silverMaterial: metal Size: 4 x 10 x 4mm(Inner Diameter x Outer Diameter x Thickness)Bearings reduce friction by providing smooth metal balls or rollers and a smooth inner and outer metal surface for the balls to roll against.These balls or rollers...
30 Pcs 2mm Hole Orange Plastic Belt Pulley for DIY RC Toy Car Airplane K8Y7 Product Name : Belt Pulley;for : DIY Toy Model;Pulley Size : 17 x 5mm/0.67" x 0.2"(D*T)Fit Belt Width : 1.7mm/0.07";for Shaft Dia : 2mm/0.08"Total Height : 5mm/0.2";Materials : PlasticColor : Orange;Net Weight : 19gTotal Weight : 19gFeature:Orange plastic belt pulley, 17mm...
Product Name : Thrust Ball Bearing; Type : 51102(8102) Direction : Single Outer Diameter : 28mm/ 1.1"Inner Diameter : 15mm/ 0.59" Thickness : 9mm/ 0.354"Package Content : 2 x Thrust Ball BearingsMaterial : Carbon SteelColor : As ShownWeight : 45gThey are mainly used in automotive industry and machine tool.Single direction thrust ball bearings consist of a...
1X(Plastic Shell Batteries Holder Box for 10 x 1.5V AA Battery T6V4) 1X(Product Name : Battery Case;Material : Plastic, MetalBody Size : 15 x 5.6 x 1.6cm/5.9" x 2.2" x 0.6"(L*W*H);Cable Length( Each ) : 14cm/5.5"Battery Type : 10 x 1.5 V AA;Color : BlackNet Weight : 37gThis battery box holder with wire connector, fit for 10 x 1.5 V AA batteries.Battery...
Plastic Shell Batteries Holder Box for 10 x 1.5V AA Battery P3Z7 Product Name : Battery Case;Material : Plastic, MetalBody Size : 15 x 5.6 x 1.6cm/5.9" x 2.2" x 0.6"(L*W*H);Cable Length( Each ) : 14cm/5.5"Battery Type : 10 x 1.5 V AA;Color : BlackNet Weight : 37gThis battery box holder with wire connector, fit for 10 x 1.5 V AA batteries.Battery is not...
This battery box holder with wire connector, fit for 10 x 1.5 V AA batteries.Battery is not included here.Brand Unbranded MPN Does not apply UPC 4894462368428 EAN 4894462368428 ISBN 4894462368428Plastic Shell Batteries Holder Box for 10 x 1.5V AA Battery B1E7 V8S7This battery box holder with wire connector, fit for 10 x 1.5 V AA batteries.Battery is not...
1X(Needle Cam bearing D2L6) 1X(The follower roller bearingHigh quality, high speedInner diameter: you 0.31pulgadas / 8 mmOutside Diameter: 0.75 inches / 19mmMaterial: Bearing steelDescription:Model: CF8Color: as shown in the imageThe package includes:1 x needle cam bearingNote:Light shooting and different displays may cause the color of the item in the...
10pcs Miniature Sealed Metal Shielded Metric Radial Ball Bearing Model: MR1 B2A1 model: MR105ZZColour: silverMaterial: metal Size: 5 x 10 x 4mm(Inner Diameter x Outer Diameter x Thickness)Bearings reduce friction by providing smooth metal balls or rollers and a smooth inner and outer metal surface for the balls to roll against.These balls or rollers...
6004-2RS Double Side Sealed Ball Bearing 20mm x 42mm x 12mmProduct Name : Sealed Ball Bearing;Model : 6004-2RS Material : Metal, Rubber;Color : Silver Tone, Black Internal Diameter : 20mm/0.79``;Outside Diameter : 42mm/1.65`` Width : 12mm/0.47``;Net Weight : 67g Package Content : 1 x Sealed Ball Bearing Brand Unbranded MPN Does Not Apply UPC Does not...
ABS Case for Raspberry Pi Zero W U3N9 Compatible with Raspberry Pi Zero W. Super-slimline profileThe case consists of two parts. It has a standard base featuring a cut-out to allow access to the GPIO, and a choice of three lids: a plain lid, a GPIO lid (allowing access to the GPIO from above), and a camera lid (which, when used with the short camera...
606Z 6 x 17 x 6mm Metal Miniature Deep Groove Ball Bearings 5 Pcs F2V7 Product Name : Deep Groove Ball Bearing;Bearing Model : 606ZBearing Standard(mm) : 6 x 17 x 6;Inner Diameter : 6mm/ 0.23"Outer Diameter : 17mm/ 0.66";Width : 6mm/ 0.23"Material : Metal;Color : Silver ToneWeight : 30g;Features metal material, double shielded, to protect the bearing...
ABS Case for Raspberry Pi Zero W O7V1 Compatible with Raspberry Pi Zero W. Super-slimline profileThe case consists of two parts. It has a standard base featuring a cut-out to allow access to the GPIO, and a choice of three lids: a plain lid, a GPIO lid (allowing access to the GPIO from above), and a camera lid (which, when used with the short camera...
2X( DIY Battery Holder w 6 Pins for 3x 18650 Rechargeable Li-ion Batteries H4N9) 2X(Product Name : Battery Holder w Pins;Fit for : 3 x 18650 Rechargeable Li-ion Battery(Not included here)Size : 78 x 60 x 21mm/3.1" x 2.4" x 0.83"(L*W*H)Weight : 24gMaterial : Hard Plastic, MetalColor : BlackPackage Content : 1 Pcs x 18650 Battery Holder w PinsNote:Light...
ABS Case for Raspberry Pi Zero W T1M3 Compatible with Raspberry Pi Zero W. Super-slimline profileThe case consists of two parts. It has a standard base featuring a cut-out to allow access to the GPIO, and a choice of three lids: a plain lid, a GPIO lid (allowing access to the GPIO from above), and a camera lid (which, when used with the short camera...
2X( DIY Battery Holder w 6 Pins for 3x 18650 Rechargeable Li-ion Batteries G4Z4) 2X(Product Name : Battery Holder w Pins;Fit for : 3 x 18650 Rechargeable Li-ion Battery(Not included here)Size : 78 x 60 x 21mm/3.1" x 2.4" x 0.83"(L*W*H)Weight : 24gMaterial : Hard Plastic, MetalColor : BlackPackage Content : 1 Pcs x 18650 Battery Holder w PinsNote:Light...
ABS Case for Raspberry Pi Zero W M6P5 Compatible with Raspberry Pi Zero W. Super-slimline profileThe case consists of two parts. It has a standard base featuring a cut-out to allow access to the GPIO, and a choice of three lids: a plain lid, a GPIO lid (allowing access to the GPIO from above), and a camera lid (which, when used with the short camera...
2X( DIY Battery Holder w 6 Pins for 3x 18650 Rechargeable Li-ion Batteries C3O2) 2X(Product Name : Battery Holder w Pins;Fit for : 3 x 18650 Rechargeable Li-ion Battery(Not included here)Size : 78 x 60 x 21mm/3.1" x 2.4" x 0.83"(L*W*H)Weight : 24gMaterial : Hard Plastic, MetalColor : BlackPackage Content : 1 Pcs x 18650 Battery Holder w PinsNote:Light...
10pcs 13Size Miniature Metal Shielded Sealed Groove Model Ball Bearing Size S2R3 model: MR74-ZZ Colour: silverMaterial: metal Size: 4 x 7 x 2.5mm(Inner Diameter x Outer Diameter x Thickness)Bearings reduce friction by providing smooth metal balls or rollers and a smooth inner and outer metal surface for the balls to roll against.These balls or rollers...
2X(Black Two Layers 8x1.5V AA Batteries Battery Holder Case w Wire Leads T4C1) 2X(Product Name : Battery Case;Fit : for 8x 1.5V AABattery(Non Included)Body Size : 63 x 58 x 30mm/ 2.5" x 2.3" x 1.2"(L*W*H);Cable Length( Each ) : 15cm/ 5.9"Material : Plastic, Metal;Color : BlackWeight : 21gThis battery box holder with wire connector, fit for 8 x 1.5 V AA...
10pcs Miniature Sealed Metal Shielded Metric Radial Ball Bearing Model: MR1 V5P1 model: MR106-ZZ Colour: silverMaterial: metal Size: 6 x 10 x 3mm(Inner Diameter x Outer Diameter x Thickness)Bearings reduce friction by providing smooth metal balls or rollers and a smooth inner and outer metal surface for the balls to roll against.These balls or rollers...
Spring Clip 6x1.5V AA Battery Holder Storage Case ON/OFF Switch with Cap G9V1 Product Name : Battery CaseMaterial : Plastic, MetalBody Size : 96 x 72 x 19mm/3.8" x 2.8" x 0.75"(L*W*H)Cable Length( Each ) : 14.5cm/5.7"Fit Battery Model : for 6 x 1.5V AA Battery(Not Included Here)Package Content : 1 x Battery Case Holder with CoverColor : BlackWeight :...
Product Name : Battery CaseMaterial : Plastic, MetalBody Size : 96 x 72 x 19mm/3.8" x 2.8" x 0.75"(L*W*H)Cable Length( Each ) : 14.5cm/5.7"Fit Battery Model : for 6 x 1.5V AA Battery(Not Included Here)Package Content : 1 x Battery Case Holder with CoverColor : BlackWeight : 56gThis battery box holder with wire connector. Designed with a cap, and a on/off...
1X(Spring Clip 6x1.5V AA Battery Holder Storage Case ON/OFF Switch with Cap X6W4 1X(Product Name : Battery CaseMaterial : Plastic, MetalBody Size : 96 x 72 x 19mm/3.8" x 2.8" x 0.75"(L*W*H)Cable Length( Each ) : 14.5cm/5.7"Fit Battery Model : for 6 x 1.5V AA Battery(Not Included Here)Package Content : 1 x Battery Case Holder with CoverColor : BlackWeight...
Product Name : Battery CaseMaterial : Plastic, MetalBody Size : 96 x 72 x 19mm/3.8" x 2.8" x 0.75"(L*W*H)Cable Length( Each ) : 14.5cm/5.7"Fit Battery Model : for 6 x 1.5V AA Battery(Not Included Here)Package Content : 1 x Battery Case Holder with CoverColor : BlackWeight : 56gThis battery box holder with wire connector. Designed with a cap, and a on/off...
10pcs Miniature Sealed Metal Shielded Metric Radial Ball Bearing Model: 604 H5H1 model: 604 ZZColour: silverMaterial: metal Size: 4 x 12 x 4MM(Inner Diameter x Outer Diameter x Thickness)Bearings reduce friction by providing smooth metal balls or rollers and a smooth inner and outer metal surface for the balls to roll against.These balls or rollers...
2X(10 x CR2032 plastic button cell battery base holder for SMD SMT coffee F5Q8) 2X(Product Name: Button Battery HolderSuitable for: for CR2032 battery (not included here)Material: plastic, metalColor: coffeeSize: 24 x 15 x 5mmInner diameter: 20 mmNet weight: 9gPackage Contents:10 x button battery holderOnly the above package content, other products are...
10pcs Miniature Sealed Metal Shielded Metric Radial Ball Bearing Model: MR1 P8U6 model: MR115ZZ Colour: silverMaterial: metal Size: 5 x 11 x 4mm (Inner Diameter x Outer Diameter x Thickness)Bearings reduce friction by providing smooth metal balls or rollers and a smooth inner and outer metal surface for the balls to roll against.These balls or rollers...
1X(10 Pack - MF105-ZZ (5 x 10 x 4 mm) Flanged Ball Bearing Y4F9) 1X(Inside Diameter: 5, mm Outside Diamater: 10, mm Width: 4 mmMaterial: Bearing Steelcolor:SilverPackage Contents: 10x bearingNote: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is...
10 Pack - MF105-ZZ (5 x 10 x 4 mm) Flanged Ball Bearing C5N8 Inside Diameter: 5, mm Outside Diamater: 10, mm Width: 4 mmMaterial: Bearing Steelcolor:SilverPackage Contents: 10x bearingNote: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.
20pcs White Housing CR2032 SMD Cell Button Battery Holder Socket Case H9D2 Product Name : Cell Button Battery Holder;Fit Battery Model : for CR2032 Battery (Not Included Here)Material : Plastic, Metal;Body Size : 24 x 15 x 5mm / 0.9" x 0.6" x 0.2"(L*W*H)Inner Diameter : 20mm / 0.8";Color : White, Gold ToneNet Weight : 31gPackage Content : 20 x Cell...
20pcs White Housing CR2032 SMD Cell Button Battery Holder Socket Case B3N8 Product Name : Cell Button Battery Holder;Fit Battery Model : for CR2032 Battery (Not Included Here)Material : Plastic, Metal;Body Size : 24 x 15 x 5mm / 0.9" x 0.6" x 0.2"(L*W*H)Inner Diameter : 20mm / 0.8";Color : White, Gold ToneNet Weight : 31gPackage Content : 20 x Cell...