30A 12V 1-csatornás relé modul modul H / L szint optikával

201632184948

Új termék

30A 12V 1-Channel Relay Module Board With Optocoupler H/L Level Triger30A relay module, normally open interface maximum load: AC 250V/30A, DV 30V/30A
Optical coupling isolation, driving ability is strong, stable performance;Trigger current is 5mA
Module can be set high level or low level trigger by the jumper
Power indicator light (green), relay status indicator light (red)
Module Size:50mm*33mm*24mm
 
Technical parameters:
Voltage version:12V
The static current:5mA
Working current:80mA
Trigger current:2-4mA
 
Module interface specifications:
DC : DC power supply positive pole
DC- :DC power supply negative pole
IN : signal triggering pin
JD : relay control voltage positive
JD- : relay control voltage negative
DC and JD shorted by jumper cap, DC- and JD- shorted with jumper cap, it is the same voltage between trigger terminal and relay control terminal
High and low level trigger mode selection.Jumper and L pin connection, IN pin is low level triggerJumper and H pin connection, IN pin is high level trigger
Normally closed pin (NC) : relay normally closed pin
Common pin (COM) : relay common pin
Normally opened pin (NO) : relay normally opened pinPackage Included:

Bővebb leírás

0 / 384 / Gyorsan Fogyó termék

375 Ft‎

-70%

1 249 Ft‎

Egyéb infó

30A 12V 1-Channel Relay Module Board With Optocoupler H/L Level Triger30A relay module, normally open interface maximum load: AC 250V/30A, DV 30V/30A
Optical coupling isolation, driving ability is strong, stable performance;Trigger current is 5mA
Module can be set high level or low level trigger by the jumper
Power indicator light (green), relay status indicator light (red)
Module Size:50mm*33mm*24mm
 
Technical parameters:
Voltage version:12V
The static current:5mA
Working current:80mA
Trigger current:2-4mA
 
Module interface specifications:
DC : DC power supply positive pole
DC- :DC power supply negative pole
IN : signal triggering pin
JD : relay control voltage positive
JD- : relay control voltage negative
DC and JD shorted by jumper cap, DC- and JD- shorted with jumper cap, it is the same voltage between trigger terminal and relay control terminal
High and low level trigger mode selection.Jumper and L pin connection, IN pin is low level triggerJumper and H pin connection, IN pin is high level trigger
Normally closed pin (NC) : relay normally closed pin
Common pin (COM) : relay common pin
Normally opened pin (NO) : relay normally opened pinPackage Included:
201632184948 - ali110 (280)

30 egyéb termék a kategóriából: