The LilyPad Iduino is a microcontroller board designed for wearables and e-textiles. It can be sewn to fabric and similarly mounted power supplies, sensors and actuators with conductive thread.
The LilyPad Iduino can be programmed with the Arduino software . *Note*, the LilyPad Arduino should only be programmed with software versions 0010 or higher. You can program it with earlier versions, but all of the time related functions will be off (twice as slow as they should be).
The ATmega168V or ATmega328V on the LilyPad comes preburned with a that allows you to upload new code to it with the Arduino software. You can also bypass the bootloader and program the ATmega through the ICSP (In-Circuit Serial Programming) header.
Operating Voltage2.7-5.5 V
Input Voltage2.7-5.5 V
Digital I/O Pins14 (of which 6 provide PWM output)
Analog Input Pins6
DC Current per I/O Pin40 mA
Flash Memory16 KB (of which 2 KB used by bootloader)
Clock Speed8 MHz
5PCS*LilyPad 328 ATmega328P Main Board compatible with Arduinoâ€™s IDE
5PCS LilyPad 328 ATmega328P Main Board compatible with Arduinoâ€™s IDE