2db ESP8266 ESP-06 WiFi modul 25dbm 802.11b / g / Nagyobb

2db ESP8266 ESP-06 WiFi modul 25dbm 802.11b / g /

Új termék

2 001 Ft‎

Egyéb infó

1. Support 802.11 B/G/N
2. Communication range up to 100 yards depending on environment.
3. Standard 3.3VDC operation with 5V compatible I/O.
4. Standard 3 wire (TXD/RXD/GND) serial communication (idle high) at 115200/8/N/1.
5. Standard 0.1" (2.54mm) half through hole.
6. Upgradeable firmware.
7. Three mode of operations: Client/Access Point/Both Client and Access Point.
8. Support all major security schemes: OPEN/WEP/WPA_PSK/WPA2_PSK/WPA_WPA2_PSK.
9. Support both TCP and UDP communication.
10. Working as TCP/UPD server supports up to five (5) connections.
11. Working as station can connect up to 5 TCP/UPD servers.
The ESP-02 can connect to all standard non-SSL websites in the world.
12. Simple AT commands for all operations.
13. Connection based data reception or transparent data reception.
14. Programmable client connection inactivity timeout.
15. Automatic domain name address resolution for public domain name
but not the local name within the local area network (router).
16. Detailed English user manual in PDF format and will be upon purchasing via email.

The following is the list of AT commands:
1. AT-Attention
2. AT+RST-Soft reset
3. AT+GMR-Retrieve firmware version
4. AT+CWMODE-Operation mode selection
5. AT+CWJAP-Join network
6. AT+CWLAP-Available network listing
7. AT+CWQAP-Exit network
8. AT+ CWSAP-Setup network name, password, radio channel and security scheme
9. AT+ CWLIF-Listing connected stations
10. AT+ CIPSTATUS-Connection listing
11. AT+CIPSTART-Initiating connection
12. AT+CIPSEND-Sending data
13. AT+CIPCLOSE-Closing connection
14. AT+CIFSR-Displaying IP from access point
15. AT+CIPMUX-Single or multiple connection selection
16. AT+CIPSERVER-Socket server on/off
17. AT+CIPMODE-Serial port transparent or connecdtion based data output selection
18. AT+CIPSTO-Socket server automatic connection timeout setting
19. +IPD-Serial port connection based data output
20. AT+CIOBAUD-only available with firmware .923 or newer. Also .923 firmware default
baudrate is 9600.firware .91 and .92 default baud rate is 57600 and 115200 respectively.

Package Included:
2 x ESP8266 ESP-06 Serial Wireless WIFI module ransceiver 25dbm 802.11b/g/n 2.4G
2PCS ESP8266 ESP-06 Serial Wireless WIFI module ransceiver 25dbm 802.11b/g/n

30 egyéb termék a kategóriából: