Hangra aktiválódó on off taps lámpa izzó

P054509

Új termék

2 434 Ft‎

-7%

2 617 Ft‎

Egyéb infó

Description:1. The clapper is a sound activated on and off switch for applicances.
2. While in the HOME mode, the clapper can operate either one or two applicances by clapping two times to operate the first applicance and three times to operate the second applicance. (More details please refer to the instruction manual).
3. While in AWAY setting, the clapper can serve as a limitted function security device -- almost any noise will turn on the connected applicance(s) to discourage potential instruders, also, it is convenient for temporaily turnign on a light when entering a dark room such as a garage or a basement.
4. You can adjust your clapper to respond to soft or loud claps as well as adjusting for the noise level in your room. (More details please refer to the instruction manual).
5. The three lights on the face of the clapper will help you determine the proper way to clap your applicances on or off -- each clap detection light will grow when a proper clap or a similar sound is detected. (Note: Claps that are too soft, too fast, or too slow will not be detected, as a result, the clap detection lights will not glow, and the applicance will not activate. -- More details please refer to the instruction manual).

Specifications:1. Type: On/ Off sound activated switch.
2. Voltage: 110V/220V.
3. Color: White.
4. Support up to 2 applicances.
Size: 8.7cm x 9.5cm x 3.5cm.

Instructions:
How to operate an apllicance with 2 claps:1. Set Sensitivity Dial to HOME.
2. Plug applicance into left receptacle of the clapper(below the "II") -- the maximun wattage per outlet is 250W. If you are using both the 2 clap and 3 clap receptacles, the combined total wattage can not exceed 400W.
3. Plug clapper into the wall socket.
4. Manually turn applicance on -- the indicator light to the left of the "II" will glow when the applicance has been manually turned on, but is clapped off.
5. You can now turn on or off by clapping. You don't have to clap very hard. The clapping sequence is more important than how loudly you clap -- when each pause is approximately 1/2 to 1 second long, the three pauses after the second clap are very important since the clapper must determine that you are not going to clap a thid time. If you clap a third time, the applicance connected to the two clap receptacle would not activate.

How to operate an apllicance with 3 claps:1. Set Sensitivity Dial to HOME.
2. Plug applicance into right receptacle of the clapper(below the "III") -- the maximun wattage per outlet is 250W. If you are using both the 2 clap and 3 clap receptacles, the combined total wattage can not exceed 400W.
3. Plug clapper into the wall socket.
4. Manually turn applicance on -- the indicator light to the right of the "III" will glow when the applicance has been manually turned on, but is clapped off.
5. You can now turn on or off by clapping. You don't have to clap very hard. The clapping sequence is more important than how loudly you clap -- when each pause is approximately 1/2 to 1 second long, the last pause after the thid clap is very important since the clapper must determine that you are not going to clap a fourth time. If you clap a fourth time, the applicance would not activate.

Note:1. Do not use the clapper with any electrical heating applicances such as toasters, hair dyers, coffee pots, etc.
2. Do not use the clapper with any applicance that can create a fire hazard with prolonged use.

Package Included:1 x Clapper

NO Retail Box. Packed Safely in Bubble Bag.
P054509

30 egyéb termék a kategóriából: